Adjustable Kick Plate
The Adjustable Kick Plate is a low protective barrier. The Toeboard or Kickplate protects openings on platforms when there is a risk of dropped objects and tools from height.
The Adjustable Kick Plate protects openings on platforms when there is a risk of dropped objects and tools from height. The Kick plate or toe board is a low protective barrier and is easy to install with J-bolts, nuts and spring pins. The adjustable kick plate is designed to be a low protective barrier and is easy to install with galvanized J-bolts to grated floors. The toe board can protect any edge openings and is designed in standard sizes. The advantage for using the adjustable kick plate is cost savings because grated openings can be finished and safely closed off with a toe board directly. The adjustable kick plate is cost effective and can be reused at different locations.
Strong solid design opening reinforced
Durable and reusable product
No maintenance or hot work permit
Fast to install and safe in use
Saves time and money
Aluminium production is greener than plastic alternatives, recyclable and corrosion resistant.
Excellent outdoor weatherability
Non-corrosive – Silver colored
Design in accordance NEN-EN-ISO 14122
Adjustable kick plate is an OSHA guided designed standard toe board
units to larger the opening. The adjustable kick plate comes in one standard size, the units can be increased at any time to adjust the size. The adjustable kick plates will reduce turnaround time for engineering and design, as well as installation time constructing the grated floors and railings. Easily installed and removed by hand.
Supplied with galvanized J-Bolt, spring pin and nuts.
Fast installation by hand, easy removal
No hot work permit, or scaffolding required
No need for welding or hotwork
This is what Occupational Safety and Health Administation (OSHA) provides as guidance on Guarding of Edges: 1917.112(d): Toeboards; Toeboards shall be provided when employees below could be exposed to falling objects such as tools. Toeboards shall be at least 3½ inches (8.9 cm) in height from top edge to floor level, and be capable of withstanding a force of 50 pounds (222 N) applied in any direction. Drainage clearance under toeboards is permitted.
Adjustable kick plate is an OSHA guided designed standard toe board:
No openings over one inch (25 mm)
lmost 4 Inches high, should at least 3½ inches (or 90 mm) high
Adjustable kick plate is capable of withstanding, a force of at least 50 pounds (222 n) applied in any direction